The JUGAO plant in Haian, Nantong, from the air

Proof before shipping

Bent. Measured.Signed. Shipped.

Every claim here is a record you can ask for, filed under the serial number of the machine it belongs to.

Release test

Nine readings,
one band.

Not a promise of “high precision”. A fixed procedure: the same steel, the same die, the same instrument, and a band every reading has to land in before anyone signs.

Warm-up
15 to 20 minutes, until the oil is at 35–45 °C.
Material
Q235 cold-rolled sheet, 2.0 or 3.0 mm. One part at least 80% of the table length, or three segment samples.
Tooling
Ground standard dies, V = 8t.
Set-up
A first part sets the springback and crowning compensation. It does not count.
Parts
Three 90° bends in a row, each read at left, center and right.
Instruments
Digital protractor, 0.01° resolution, in calibration. A 1 m precision straightedge with feeler gauges for straightness.
Release
All nine readings inside the band, then PASS is signed.
89.089.590.090.591.0BAND 89.5–90.5°BAND 89.7–90.3°90°
Angle
±0.5°±0.3°
Spread
≤0.5°≤0.3°
Straightness
≤0.3≤0.2mm/m
Indentation
≤0.05mm
Band drawn 30× its true width

Sample test

Send your parts.
We bend them first.

Before you order, your drawing and your material go through our machines. The agreed result becomes the acceptance baseline for the machine you buy.

What to send

  • 3 to 5 cut blanks

    For each size you want tested, already cut to size.

  • Mill test certificate

    The MTC for the batch the blanks were cut from.

  • Drawing and tolerances

    2D or 3D, with the tolerance standard the part will be judged by.

Review
Engineering checks the drawing within 24 hours, before anything is shipped.
If it drifts
If the batch's yield strength or thickness moves the angle or inside radius, engineers on both sides check the material data and sign a deviation memo. The measured result then becomes the baseline.

Is my test free?

Tooling
Material
Parts
Bending
Machine time
FreeQuoted

No charge for the test. Freight both ways and any duties are on you.Charged per quotation, then credited in full against commissioning if you buy the machine.

Evidence pack

One serial number,
three files.

The number stamped on the nameplate ties together the machine's photos, its test video and its measurement record, all logged in one serial-number ledger.

JUGAONantong Jugao
Machinery Co., Ltd.
Model
—
Rating
—
Control
—
Built
—
S/N
[S/N]
Nameplate · assigned at build
  • IMG-[S/N]

    Nameplate and full-machine photos, high resolution.

    Photos
  • VID-[S/N]-FAT

    The release test on video, with the nameplate in shot.

    Video
  • RPT-[S/N]-FAT

    The measurement record, stamped.

    Report

Before any of it is shown publicly, third-party customer names, confidential dimensions and faces are blurred, and written consent is on file.

Factory & test video

Filmed on the
machine you buy.

One machine, one file. Every clip is tied to a serial number, and generic footage is never passed off as yours. Third-party logos, drawing dimensions and faces are blurred first.

Press brake tooling, where the release test is filmedRecVID-[S/N]-FAT

Release testRequired

  • Nameplate and serial number, close up
  • The angle read at left, center and right
Press brake on the assembly floorRecAssembly

Assembly trace

  • Cylinders, linear scales and controller being fitted
JUGAO shop floorRecManufacturing

Manufacturing

  • Gantry milling and stress-relief annealing

OEM release test

Your drawing on
the test cover.

For OEM buyers the acceptance terms go into the technical agreement, so the machine is tested to your tolerances, not ours.

Agreed
At the technical agreement stage, an OEM release outline is written to your acceptance terms.
On the cover
The machine's serial number, your controlled drawing number and revision, the material grade and your tolerance limits.
Run
Test parts are bent with the parameters you specify.
Reported
Every measured value is set against the drawing tolerance, item by item.
Signed
By our quality manager, our application engineer and your representative, on site or over live video.
FAT cover indexJUGAO

OEM release outline

Machine S/N[S/N]
Customer drawingDWG-[No.] · Rev.[X]
Material gradeAs specified by the customer
Tolerance limitsOEM values
Test parametersCustomer-specified
ResultMeasured vs drawing, item by item
Quality manager
Application engineer
Customer representative

Certificates

What each
certificate covers.

A certificate names models, standards and dates. We print what the paper says, and nothing wider.

CE

European Union

Standards
Machinery Directive 2006/42/EC and the EMC Directive.
Covers
Only the export models named in the certificate annex.

OSHA

North America · guarding

Standard
Machine guarding to OSHA 1910.212.
Covers
North America export builds, fitted with safety laser guarding and a monitoring module.
Not included
Field certification of the whole machine by a testing laboratory. Quoted separately if you need it.

ISO 9001

Quality system · 2015

Scope
Design and manufacture of sheet-metal machinery at Nantong Jugao Machinery Co., Ltd.
Shown
Only while valid. Renewal starts 30 days before expiry.

Customer cases

Cases, with the
names blacked out.

No case goes up without the customer's signed release. This is what one will show, and what it never will.

Case file · template
Location
[State], [Country]
Industry
[Industry]
Machine
[Model] · delivered [Month Year]
Part
[Material, thickness] · [Part type]
Result
Measured angle ±[x]°
Customer
Logo · building
Street address
Price · terms
Drawing sizes

Shown

  • Country or state, and the industry
  • Machine model and the month it was delivered
  • Material, part type and the measured angle

Never shown without written consent

  • Company name, logo, street address and building front
  • Price, discounts and payment terms
  • Confidential drawing sizes, patented features and sensitive end uses

On file before it goes up

  • The customer's signed case-release letter
  • Export declaration or bill of lading, amounts masked, with site acceptance photos
  • The customer's feedback email or signed acceptance sheet

Engineering review

Send a drawing.
Get an engineer.

Standard selections answered within 4 hours. Parts outside the rules get a written process review within 24 hours.

  • Part drawing: DXF, DWG, STEP or PDF
  • Material and thickness
  • Longest bend or cut length
  • Yearly volume

Write to info@ntjugao.com or message the factory on WhatsApp +86 132 2211 1178.

Drawings (DXF, DWG, STEP, PDF): attach them to an email to info@ntjugao.com, quoting your name.

Contact Us