CNC controllers

Shearing machinecontrol systems

D series and E series CNC controllers for shearing machines: back gauge, cutting angle, gap and stroke length control.

Shear system

Control, drive,
monitor.

The shearing machine control system is composed of a control part, a driving part and a monitoring part.

Control panel on a JUGAO CNC shearing machine

CNC controllers for shearing machines

D series.

Shearing machines
DAC-310 Shear control range single-axis programmable shear control solution

D series

DAC-310

Shear control range single-axis programmable shear control solution

The DAC-310 shear controller provides a complete and compact shear control application. Including backgauge control, gap control and stroke length limitation this state of the art electronics based unit makes a versatile solution.

Whatever kind of positioning is selected, depending on the application you can select either two-side positioning as well as single-side positioning with spindle fault elimination. Referencing can either be done automatically or the DAC-310 will always remember the last position of the system after powering off.

The backgauge can be moved manually by selecting pushbuttons in 2 different speeds.

DAC-360 Compact and complete control for shearing machines

D series

DAC-360

Compact and complete control for shearing machines

The DAC-360 control provides a complete solution for shearing machines. It includes the control of backgauge, cutting angle, stroke length and gap, based on state of the art electronics.

Beside backgauge control, the DAC-360 automatically calculates the required setting for the cutting angle and gap depending on material properties and thickness. The stroke length is limited for minimal production time and related to the material length to cut.

Full pressure control for clamping and cutting is on board the DAC-360.

With its bright LCD screen a clear and easy operation is offered. The numerical programming is user-friendly and guides the operator through the programming possibilities.

CNC controllers for shearing machines

E series.

Shearing machines
E10-S One Axis Position Display Unit

E series

E10-S

One Axis Position Display Unit

  • Back gauge position display
  • Resolution: 0.01mm/0.001 inch
  • Stock counter
  • Stroke length setting
  • One side positioning indication
  • Software limitation
  • Power-down memorization

Engineering review

Send a drawing.
Get an engineer.

Standard selections answered within 4 hours. Parts outside the rules get a written process review within 24 hours.

  • Part drawing: DXF, DWG, STEP or PDF
  • Material and thickness
  • Longest bend or cut length
  • Yearly volume

Write to info@ntjugao.com or message the factory on WhatsApp +86 132 2211 1178.

Drawings (DXF, DWG, STEP, PDF): attach them to an email to info@ntjugao.com, quoting your name.

Contact Us